Moisting
The surface of the EVERSLIDE Elements must be kept moist by sprinkling water regularly on the Elements. This will reduce friction and thus make sledding faster and more enjoyable. How often this should be done depends on the climate. In hot and sunny conditions, the surface needs to be sprinkled more often.
Cleaning
Keep the surface of the EVERSLIDE Elements and Safety Plates clean of dirt (sand and leaves) either by sweeping or with a pressure washer. If the sprinkling water has high levels of calcium, the Elements must be cleaned with an acid-based detergent and a pressure washer at intervals of 3-6 months, depending on the amount of precipitation of calcium on the surface of the EVERSLIDE materials. Use the pressure washer only downward and along the fibres. Finally, rinse with clean water.
Warranty
C.E. Lindgren grants a three-year warranty for EVERSLIDE products. In practice, the service life of EVERSLIDE products is much longer. It is, however, recommendable to monitor the wear of the plastic sleds and replace worn-out ones in order to ensure the safety of the riders.