Keep the surface of EVERSLIDE Plastic Matting moist by sprinkling water on it. This will reduce the friction and thus prolong the life of the product. Furthermore, it will increase the ski-jumpers’ safety in the event of a fall. The sprinkler system is not included in our deliveries. It should be built as a separate system for the landing hill.
The surface of the EVERSLIDE Plastic Matting should be cleaned of dirt, either by sweeping the leaves and sand away or by washing them away with a pressure washer. If the sprinkling water has high levels of calcium, the Elements must be cleaned with an acid-based detergent and a pressure washer every 3-6 months, depending on the amount of precipitation of calcium on the surface of the Element. Use the pressure washer only downwards, following the direction of the fibres. Clean both the surface of the Elements and that of the Safety Plates. Finally, rinse with clean water.
We recommend arranging drainage for the beginning of the braking zone in order to drain rainwater and melted snow from the outrun.
EVERSLIDE Plastic Matting System has a 5 year warranty. In practice, the matting lasts considerably longer than this.
Oy C.E. Lindgren Ab, Finland
PO.Box 18 (Teollisuustie 15)